Biodiesel Crimea ltd offers you the equipment of the batch rectification, the rectifying column.
The equipment is intended to separate the product into fractions depending on their boiling points. The oil and oil-like hydrocarbon mixtures, large fractions which are not aggressive to the carbon steels (pyrolysis oils, glycerin etc) can be used as the raw materials for processing by the rectifying column.
The productivity of the column is 4 tons a day.
After separation of the pyrolysis oil by the rectifying column manufactured by BIODIESEL CRIMEA ltd the following ratio between the received fractions is observed:
-Petrol fraction (gasoline). Volume fraction is 40%. Depending on the analysis of the product in the certified laboratory (Sevastopol laboratory No.1) the octane number of fuel determined by the research method is 114.2 that allows to use it like a high octane additive to the oil –derived petrols in the ratio up to 30%. Due to the fact that the petrol fraction contains a lot of aromatic hydrocarbons it could be widely used in petrochemistry.
- Diesel fraction. Volume fraction is about 30%. Depending on the analysis of the product in the certified laboratory (Sevastopol laboratory No.1) the cetane index of fuel determined by the research method is 23.64 that allows to use it like an additive to the oil derived diesels or like a light furnace fuel. The percentage of addition of the diesel fraction received by separation of pyrolysis oil by the rectifying column to the oil derived diesels is up to 30%. Light furnace fuel has less mechanical inclusions in comparison with the dark furnace fuel (for example, pyrolysis oil) and thus implies a smaller injectors’ clogging.
-Bitumen. Mass fraction- 30%.
Can be used for the roads covering.
To know more please call us +38 050 555 1800 or send the e-mai at: manager@biodiesel.crimea.ua, and our representative will contact you and answer all your questions!